Lake Erie Fishing Techniques
Lake Erie Walleye Fishing Techniques
These techniques are designed for open-water fishing over relatively flat bottoms consisting of mud, clay, sand or gravel, in depths of approximately 10 to 45 feet.
Below, Captain Dave explains how to rig and fish the weapon, work your lure through the swing, adjust your retrieve and use bottom bouncers. The final section covers drift fishing Lake Erie's shallow reefs.
Rigging the Weapon for Lake Erie Walleye
Line, Hooks & Sinkers
For casting, we use slip sinkers on a Carolina rig with a single snelled hook. Tie your rig approximately 14 inches long and secure a single bead in the finished loop to keep the sinker away from the hook.
A finished spinner approximately 12 to 14 inches long, tied with quality, low-visibility line, allows the lure to look natural as it spins through the water.
I use 17- or 20-pound low-visibility green Stren for tying these lures. When using an inline sinker, attach a snap swivel to the end of the lure.
Choosing Blades & Adjusting Weight
One advantage of fishing the weapon is its versatility. Rather than carrying expensive lures in numerous weights and colors, you can adjust one weapon by changing the sinker weight, blade color or blade size.
A quick-change clevis lets you switch blades easily. I prefer a folded clevis because it allows the blade to spin with very little movement.
My preferred blade is a deep-cup No. 4 Colorado blade in premium gold. The deep-cup design spins more easily than a standard blade, and I find the premium gold finish resists tarnishing and provides a brighter flash.
How to Bait Your Hook
How you place the nightcrawler on your hook makes a difference. Use approximately half a nightcrawler, threading the hook through its center and leaving a straight tail approximately 2 inches long.
That trailing piece of bait adds action to the lure. Avoid bunching a large wad of nightcrawler onto the hook, which can interfere with the spinner's natural appearance, sinking motion and blade action.
Casting the Swing
Positioning Your Cast
As the boat drifts sideways, cast from the bow or stern approximately 45 degrees upwind and close your bail immediately.
If fish are marking at approximately 25 feet, the goal is to have your lure swing back toward the boat just above them. Walleye often feed upward, so lure depth is an important part of the presentation.
Counting Your Lure Down
When your lure hits the water, close the bail and begin counting: “One thousand one, one thousand two,” and so on.
As a rough reference, a 3/4-ounce lure may sink approximately 1 to 1 1/2 feet per second. Actual sinking speed varies with your rig, line, wind and current, so use practice casts to establish your count.
Reel just enough to keep the line tight as the lure drops, taking up slack as it works through the swing. Many strikes occur on the drop, and maintaining contact with the lure helps you detect them.
Working Through the Swing
For the example above, begin a slow retrieve at approximately a 10-count, using just enough speed to turn the spinner blade. Adjust that count to match the depth of the fish and your lure's actual sinking rate.
About three-quarters of the way through the swing, the lure will begin to feel heavier as the boat's drift pulls it. Slow your retrieve and allow the boat to help finish moving the lure around the turn.
When your line stops swinging and trails straight downwind, reel in and cast again.
Finding the Sweet Spot
Fish the same casting position for approximately 10 minutes. If you are not getting strikes, move your cast approximately 5 feet upwind or downwind and try again.
Continue adjusting until you find the productive angle. A strike may feel like a small peck or simply an unexpected increase in weight. Set the hook when you detect the bite.
Anglers who prefer dragging their spinners should fish along the port or starboard side, leaving the bow and stern available for anglers actively casting and working the swing.
Learn from the Angler Catching Fish
If someone nearby is catching walleye, watch their casting angle, casting distance, sinker weight, countdown and retrieve speed.
Try to match that presentation from your own position. If your lure returns before theirs, slow down. If it returns later, speed up.
Every position on the boat fishes a little differently. A productive angler has often figured out the presentation for that position, so concentrate on adapting the technique to your own spot.
Lake Erie Walleye Retrieve Techniques
The Lake Erie Shuffle
Stop reeling and pull your rod from one side to the other while keeping the lure moving and the blade spinning. Then reel in the slack as you return the rod to its starting position.
Repeat this motion to create a falling, jigging action that can entice walleye to strike.
The Smooth, Steady Retrieve
Use a smooth, consistent retrieve that keeps your spinner working. Experiment with speed until you find the presentation the fish prefer.
The Stop-and-Go Retrieve
Turn the reel handle two or three times, pause approximately three seconds and repeat throughout the retrieve.
Raising and lowering your rod tip during the retrieve can also create a falling, jigging action.
Keeping Your Lure in the Strike Zone
Wind and current change from day to day, so experiment with different sinker weights and countdowns. Knowing when your lure reaches the bottom helps you establish the correct fishing depth.
Make several practice casts and count how long it takes to contact bottom. On your next cast, begin retrieving two or three seconds before that count, so your line is tight and the spinner is working before reaching bottom.
The more time your lure spends in the strike zone, the more opportunities you have to catch fish.
If you are not getting bites, adjust:
- Your casting distance
- Your casting direction
- Your sinker weight
- Your countdown
- Your retrieve speed
- Your retrieve style
Fishing from the Downwind Side of the Boat
When fishing from the downwind side, cast and leave the bail open while counting your lure down. Because you are casting in the direction of the drift, feeding line helps the lure reach the intended depth.
As your spinner approaches the boat, open the bail and let it move back out, then work it toward the boat again. You can repeat this presentation without making a new cast each time.
This can be a convenient position for children, older anglers and anyone who prefers less casting. It is also a useful place to fish bottom bouncers.
Using Bottom Bouncers for Lake Erie Walleye
Lowering Your Rig
Pause the bottom bouncer two or three times as it descends. This gives the trailing lure time to straighten and helps prevent tangles.
Once the bouncer reaches bottom, close the bail and establish your fishing depth. If the fish are holding above bottom, raise the rig approximately one to six turns of the reel handle.
Many of our bottom-bouncer fish are caught either just after contacting bottom and closing the bail, or after raising the rig two to four turns.
Adding Action to Your Rig
The same approach can be used under the boat, off the stern or off the bow. The bow can be productive because wave movement raises and lowers the boat, adding action to the lure.
Anglers on the downwind side can create similar movement by lifting their bottom bouncers and lowering them back toward bottom while maintaining a tight line.
When to Switch to Casting
For walleye suspended in the upper half of the water column, casting the swing is generally a better choice than fishing a bottom-bouncer rig.
For bottom bouncers, we use two-hook snelled rigs approximately 3 feet long to separate the lure from the bouncer weight.
Rod & Line Setup
A 6- to 6 1/2-foot medium-light to medium-action rod is a good choice for these techniques.
Our setup uses approximately 15-pound braided line with a 20-pound fluorocarbon leader approximately 2 feet long.
If you are not catching fish, change your presentation!
Drift Fishing the Weapon on Lake Erie's Shallow Reefs
Understanding Structure Fishing
Fishing shallow reefs differs from deep-water fishing because it is especially important to know when your lure contacts bottom.
Occasional snags and lost lures are part of fishing rocky structure. However, constant snagging can indicate that you need to retrieve faster or keep the lure farther off bottom.
Establishing Your Countdown
Start with a 1/2-ounce sinker and the same basic weapon rig described above. Cast and count until the lure reaches bottom.
On your next cast, begin reeling two or three seconds before reaching that count. Use a steady retrieve in shallow water and avoid dragging the lure hard across the rocks.
Recognizing Goby Bites
Lake Erie reefs hold gobies that live close to the bottom. Repeated small pecks may indicate that gobies are picking at your bait and that your lure is too close to bottom.
When that happens, make three quick turns of the reel handle, then immediately return to a steady retrieve.
Planning a Safe & Productive Reef Drift
Begin your drift just off the edge of the reef so the boat moves onto and across the structure.
Watch your depth closely. Know your boat's draft and maintain adequate clearance beneath the hull, allowing for waves and changing conditions.
Currents around shallow water can move the boat differently than expected. Monitor your chartplotter, your actual drift direction and any wind shifts.
Approaching Other Anglers
Fish in shallow water can spook easily. After drifting into deeper water, travel around the shallows being fished before setting up your next drift.
Give other boats room, avoid crossing their drifts and approach the area courteously.
Covering the Reef
Move your next drift approximately one boat length to the side so you gradually cover the entire reef.
Walleye may be holding along the reef ledges, in deeper water just off the edges or directly on top of the structure.
Other Lures for Fishing Rocky Structure
Weighted lures such as the Erie Dearie, Parish Pea and Tiny Teaser in 3/8-, 1/2- or 3/4-ounce sizes are other options for fishing rocky areas.
These lures can be worked more slowly because they do not ride the bottom in the same way as the weapon.
Captain Dave
Order Our Lake Erie Walleye Weapons
We sell and ship the Lake Erie walleye weapons we use.
$36.00 per dozen, plus $6.00 shipping.
To order, email coevannacharters@aol.com.